DentaPoint | Dental Hospital

Dental Crowns serve as an extraordinary solution for aesthetic purposes, allowing individuals to achieve a beautiful and natural-looking smile. When teeth are discolored, misshapen, or have visible flaws, cosmetic dental crowns provide an effective method of improvement.

What should you pay attention to if you are going to have a dental crown?

Impression: A good impression is essential for a good dental crown. Measurements taken with 3D scanners and teeth created with 3D printers are more aesthetic and harmonious. In our clinic, 3shape trios 5 pod scanner is used.

Material: There are many types of zirconium. Monolithic zirconium gives better results for your rear chewing teeth, and Emax zirconium gives better results for your front teeth. In our clinic, Dental Direkt zirconium and Ivoclar brand porcelain are used.

Adhesive: composite-based resin adhesives give much better results. It doesn't smell or fall off. The adhesive is as important as the crown itself. In our clinic, GC Fujicem Evolveb adhesive and Panavia™ SA C. Univ. Automix adhesive is used

Doctor: A good crown is better applied by a prosthodontist, one of the specialties of dentistry.

All this is important. You should not have a crown treatment without questioning these.

Dentapoint International is the largest clinic in Izmir with its experienced and dynamic staff. It is one of the few dental hospitals in Turkey. Applies the most accurate treatment methods with digital dentistry

Zirconia crowns represent the latest advances in dental technology and offer a durable and aesthetically pleasing solution for dental restorations.

You must have heard and read about zirconium coating many times and talked to your acquaintances who have had it done. We will explain what you should pay attention to when having zirconium teeth.

1- Material brand and quality: Zirconium is a natural mineral that is made to be applied to teeth at high pressure and temperature with a complex technology. It is produced in many countries. Germany, Brazil, Pakistan, Turkey and China are the countries that produce the most zirconium tablets. Tablets produced with German technology have high durability. In our clinic, Dental Direct zirconium tablets made in Germany are used.

2- Measurement: Dentistry is the branch of medicine that needs technology the most. There may be tooth-crown compatibility problems in measurements taken with old methods. This sensitivity may cause decay in the underlying tooth. For this reason, digital measurements must be taken with 3D Scanners. Digital measurements are not only the primary requirement for perfect zirconia, but also very important for patient comfort. In our clinic, 3shape trios 5 pod scanner is used.

3- Adhesive: Old-style adhesives based on powder-liquid mixture are problematic. It smells, melts, causes sensitivity and as a result, the crown falls off. Composite-based resin adhesives are best. It is essential to use this. In our clinic, GC Fujicem Evolveb adhesive and Panavia™ SA C. Univ. Automix adhesives are used.

4- Doctor and Technical team: dentistry includes both medicine, aesthetics and engineering. An inexperienced team without an aesthetic perspective will not produce good results.

All on four treatment is applied in case of complete tooth loss or when all teeth need to be extracted. It is a form of treatment performed by applying 4 implants to a single jaw.You will never be toothless during the treatment process. Implants and teeth are guaranteed with the warranty documents we will give you.The treatment process is as follows.The first stage takes only 3 days:-We take a 3D dental tomography on the first day you come to our clinic. And we do 3D scan so we can determine the best location for implants.-Dental implants that best suit your bone structure are applied in a short 1-hour procedure and take 3D measurements for the temporaries. We will give you all the medications you need after the surgery in the clinic.-On the second day in the clinic, your fixed temporary teeth will be ready and attached on the implants. You can eat, talk and socialize with these teeth.Stage 2 permanent teeth take only 5 days:The temporary teeth are removed and measurements are taken with a 3D scanner.Your zirconium teeth are prepared in the most suitable way for your face and smile.  During zirconium tooth rehearsals, we make sure that the teeth are perfect and the way you want them. You will return with your perfectly aesthetic and functional teeth.If you are going to have all on 4 treatment, here are the things you should pay attention to:- The implants should definitely be quality German or Swiss made implants.- Fixed temporary teeth should be preferred.-The most important thing is that the prosthesis on the implant should be a screw system, not a bonding one.

All on four treatment is a treatment that can be done once. It is very difficult to get this treatment twice because there will be deformations in your jawbone after an unsuccessful attempt. 3D Dental tomography, 3D scanners are very important

In our clinic, the world's best guaranteed implants such as Staumann, Nobel biocare, Camlog, Ankylos, Icx, bego, DXL, MIS, Ostem are used.

Dental X-Ray

Dental x-rays, also known as radiography, are indispensable diagnostic tools in dentistry that allow dentists to visualize and evaluate aspects of oral health that cannot be seen during regular dental examinations.

Since the primary condition for a good treatment is a good diagnosis, all imaging techniques of digital dentistry are available in our clinic.

1- 3D Dental Tomography: It provides a detailed view of the teeth, bones, roots and all anatomical formations in the jaw-face area, not only in two dimensions but also in 3 dimensions.

2- panoramic x-ray: provides a 2D image of the patient's teeth and the entire jaw.

3-Periapical X-ray: It provides a detailed view of the tooth roots in a more local area.

4- intraoral cameras: They allow more detailed recording and images of difficult-to-see places in the mouth.

Dentapoint International is the largest clinic in Izmir with its experienced and dynamic staff. It is one of the few dental hospitals in Turkey. It applies the most accurate treatment methods with digital dentistry.

Invisalign treatment is a revolutionary orthodontic approach that offers a discreet and effective way to straighten teeth. Unlike traditional braces, Invisalign utilizes a series of clear, custom-made aligners that are virtually invisible when worn. These aligners are comfortable and removable, allowing for easy maintenance of oral hygiene and the ability to enjoy all types of foods without restrictions. The treatment begins with a 3D digital scan of your teeth, enabling the creation of a personalized treatment plan. As you progress through the series of aligners, each set gently and gradually shifts your teeth into the desired position. Invisalign is not only known for its cosmetic benefits but also for its convenience and comfort. It's a popular choice for those seeking a more discreet and flexible orthodontic solution to achieve a confident, straight smile.

External-Internal sinus lifting operation is an implant preparation operation.

This procedure must be performed if the maxillary sinus cavities in the upper jaw are very large and there is not enough bone to be impaled.

The steps of the sinus lifting procedure are as follows.

- With 3D dental tomography, the structure and dimensions of your jawbone are determined. This is something we definitely do for planning before starting the process.

- The procedure begins with a simple local anesthesia and takes approximately 30 minutes. The sinus is opened and the sinus membrane is lifted up with a very sensitive device called piezzo surgery.

- FDI Approved human bone Graft is added into the sinus and implants are placed.

It is necessary to wait about 6 months after the procedure. Within 6 months, the implants will have healed within the solid healthy bone and will be ready for tooth construction.

Things you should pay attention to if you are going to have an external sinus lifting procedure:

1- Sinus border and bone density must be determined by 3D Tomography.

2- Piezo surgery device must be used. Otherwise, the process will not be performed with sufficient precision.

3- FDI approved and human source bone graft must be used, otherwise proper results cannot be obtained.